Hydrogen Fuel Production

• Operates from 12 to 20 volt dc power supplies (such as those listed below), including automotive batteries for onboard vehicle use.
• Produces output current pulses up to 10 amps
• Includes amp meter with all controls on front panel.
• BNC scope pulse monitoring output jack
• Includes four switchable ranges of variable pulse frequencies from <7-75 Hz, 75Hz-750Hz, 750Hz-7500Hz and 7500Hz-75 kHz
• Duty cycle control of all pulse frequencies ranges from <10% to >90%. “On to off” ratios now allows fine tuning to many different sizes and shapes of hydrolyzer cells. Duty cycle control reduces heat buildup by reducing high average currents.
• Includes heavy duty banana jacks for input power and pulse output connections.
• Size: 6 x 6 x 3"
• Note: case cover and meter may be different from that shown

View/Download Free Instructions

Video of HYDROL12V creating hydrogen gas (you're seeing the HHOCORE10, powered by the HYDROL12V).

The power conditioner allows adjustment to control the width to dwell time of the direct current pulses for maximizing HHO gas production. This feature matches the input power to your reactor cell eliminating overheating and maintaining good production efficiency. A temperature sensor prevents the system from over heating.

Produces 30 amp chopped pulses from 12 to 30 vdc input. Will operate from a 12 volt automotive battery for fuel supplementation

View/Download Free Instructions

Important: This model is an advanced system intended for use by qualified personnel, familiar with driving resonant circuits. We do not offer refunds on this equipment, but will of course repair it if a problem should develop. Please make sure you have any questions answered before purchasing this item.

• Independent voltage control from zero to maximum output of 20 kv pk-pk
• Independent current control from 5% to maximum output
• Independent frequency control from 20 to 50 khz
• Large 3 ammeter monitors AC line current. Indicates resonance peaking
• Adjustable wave form duty cycle function allowing a wide range of operation
• Adjustable safety shutdown circuit disables the circuit in case of over voltage
• Maximum output power over 200 watts
• Short circuit proof by built in leakage reactance
• 120vac 50/60 hz input..240 vac versions available with below auto step down
  transformer
• Measures 7 x 4 x 10 and weighs less than 5 pounds

Now at last a reliable and flexible power supply to effectively drive those light capacitive loads such as ozone and hydrogen cells. Adjustable frequency allows the user to correctly tune his cell to the proper operating point thus providing the necessary resonant voltage rise. A panel meter indicates the proper 180 degree phase angle. Output power may be adjusted from 10 to 200 watts. Utility unit operates from standard 120 vac 60 hz and measures 7 x 4 x 10" and weighs less than 5 pounds. Intended for hydrogen production research, corona generation, energizing dielectric barrier junctions, ozone production and other electrochemical applications.

The amount of HHO gas generated depends on the size of the reactor cell and the amount of electrical energy put into it to drive the hydrolysis.

HHO gas is a highly dangerous substance that should not be stored. Those who insist on storing it should examine this patent and also research other means of safety. We at Information Unlimited do not sanction whatsoever the storage of HHO gas. We offer this information as a potential method of reducing the danger in storing HHO gas, for those of willful intent who will disregard our warnings not to store it at all. Remember that this method does not guarantee in any way whatsoever the safe storage of HHO gas. It is strongly suggested that the researcher look into further safety methods. It is even more strongly suggested that HHO gas not be stored at all!

The generated HHO gas can be used for our Action Science Projects (HHO cannon, H-bomb demo, HHO pistol, etc.) and as a fuel supplement for gasoline engines. Optional high output current conditioner with thermal feedback control.

These instructions show how to build a reactor that can produce copious amounts of H₂ and O₂ gas simultaneously, from ordinary water. This combination when ignited can produce a substantial explosion or be used to power engines, torches, rockets, launch projectiles, etc. One advantage of this energetic reaction is that the byproducts are pure water. This eliminates pollutants such as those given from other sources of chemical energy like coal and oil. Another advantage is that the energy yield per molar weight is the highest possible by chemical reaction. This is why it is used as a rocket propellant. And yet another advantage is that this energy source is completely, 100% reusable and recyclable, with only electricity being required to convert water into H₂ and O₂ gasses, and their recombination releasing energy and converting them back into pure water. Of course it takes more energy to split the water than the energy given when it recombines, but this is true of all types of energy conversion.

As mentioned, the negative attribute is that it takes more energy to produce the gases from water than the energy released upon recombination of the gases back into water. (To overcome this disadvantage would be the “holy grail” of the energy problem.) Fortunately for us and our planet, these chemicals are in their natural state in their stable and non-explosive form of water, and it is going to be very difficult to defy nature to obtain over unity. One viable approach to make hydrogen fuel with electrolysis is to use nuclear power for producing electricity, supplying virtually unlimited amounts. If we develop a very efficient reactor, we could use this energy to make large amounts of pollutant-free hydrogen fuel for all our transportation needs, greatly reducing our CO₂ output that contributes to global warming, as well as acid rain and other associated environmental and health problems from the burning of fossil fuels.

Reactor:
Assembled Reactor Cell Core With Electrodes

This is the device in which the electrolysis occurs, where liquid water is converted (split) into H₂ and O₂ gases using electric pulses. Whereas the HHO Reactor Cell (above) is only available as plans that you must build, we can offer the Core of it pre-built to save you many hours of assembly.

This Core was designed in our labs and is the result many hours of calculations followed by many more hours of testing. Maximum performance is obtained when used with our HHO Power Conditioner (HHOPC10). The Core is made with quality materials to guarantee maximum output (the stainless steel is grade 304, the grade best-suited for this type of use due to its high oxidation resistance).

The Core represents 90% of the work of the entire reactor cell.

HHOCORE10 - HHO Core, Assembled ..............$199.95

It consists of 4 parts:

1) The control box which has a safety arming switch and a push button fire control switch. An LED indicator alerts the user that the system is armed. The control box also houses the batteries.
2) The interconnecting cable is sufficiently long (about 25-30 feet) to provide ample separation between the HHO device and the operator. If you need more distance, simply add a wiring extension.
3) The 20kv ignitor module is connected closely to the actual device.
4) Lastly, about 2-3 feet of high voltage output wire and a grounding lead are connected to our HHO projects.

Target damage on 3/4" plywood at 50 meters with a plastic projectile.