Laser Scanners

PO Box 716, Amherst, NH 03031-0716

Laser Scanners

To order, click the ITEM NUMBER to add to your shopping cart.

Laser Scanners are used in a variety of applications such as light shows, bar code readers, and 3D imaging of physical surfaces (from surveying terrain, to taking precise 3-dimensional measurements of physical objects).

SM2800 Laser Scanner

The SM2800 is a closed loop scanning system without torsion bar. It has been constantly upgraded from previous systems originally developed in 1997, based on the suggestions from its extensive customer base. It is one of the fastest ILDA 30K scanners made, with thousands of systems in use around the world.

The new SM2800 scanning system powered by our new Amp, Scan-V4.3A can scan at over 51Kpps@±8°optical with mirror size of 6mm*11mm*0.7mm. Higher scan speed can be achieved by using smaller mirrors and higher voltage.

Max Scan angle: ±30°optical (factory calibration @ ±20°)
Mirror Size: 6mm*11mm*0.7mm, (5mm*10mm*0.7mm for higher speed)
Mirror coating: High quality dielectric film
Reflectivity: >98% @45° incidence (400nm-700nm)
Dimension of Galvo: 12.7mm (diameter for fixture) x 42mm (length without mirror)
Power requirements: ±24VDC @1.2A each
Input Voltage: ±5VDC differential
Dimensions of Amp: 81.6mm*62.5mm*33mm
Protection Circuitry: Input clamping and power limiter circuit built in Amp.

Scan angle
±30°Opt
±20°Opt
±15°Opt
±8°Opt
±5°Opt

Operating voltage
±24 VDC
±24 VDC
±24 VDC
±24 VDC
±24 VDC

Speed @ Mirror size
28Kpps @ 6*11*0.7
35Kpps @ 6*11*0.7
43Kpps @ 6*11*0.7
51Kpps @ 6*11*0.7
54Kpps @ 6*11*0.7

Speed @ Mirror size
28Kpps @5*10*0.7
37Kpps @5*10*0.7
47Kpps @5*10*0.7
52Kpps@ 5*10*0.7
57Kpps @5*10*0.7

Test Pattern
ILDA 30K
ILDA 30K
ILDA 30K
ILDA 30K
ILDA 30K

Contents of Shipping Package:

(2) 2800 Scanner (Galvo) with mirror
(2) Scan V4.3A servo driver (Amp)
(1) X-Y scanner mount
(1) ±24 VDC switched power supply
(2) Shield cable for scanner

SM2800 - 57Kpps Laser Scanner ...........$750.00

SM2803 Laser Scanner

The SM2803 is an enhanced version of the SM2804. It is a smart choice if you need a low-cost laser projector powered by a preinstalled/preprogrammed control board. The galvo structure of the SM2803 is based on a proprietary technology that keeps the cost low.

It can be tuned up to 25Kpp@+/-15°on ILDA 30K test pattern, and has “beam show” as well as “graphic show” settings. The SM2803 displays a better detail of graphics than the SM2804 (such as letters at small scan angles).

Max Scan angle: ±30°optical (factory calibration @±20°)
Mirror Size: 6mm*11mm*0.7mm, (5mm*10mm*0.7mm for higher speed)
Mirror coating: High quality dielectric film,
Reflectivity: >98% @ 45°incidence (400nm-700nm)
Dimension of Galvo: 12mm (diameter for fixture ) x 42mm (length without mirror)
Power requirements: ±15VDC @1A each
Input Voltage: ±5VDC differential
Dimensions of Amp: 75mm*40mm*35mm

Scan angle
±30°Opt
±20°Opt
±15°Opt
±8°Opt
±5°Opt

Operating voltage
±15 VDC
±15 VDC
±15 VDC
±15 VDC
±15 VDC

Speed @ Mirror size
18Kpps @ 6*11*0.7
22Kpps @ 6*11*0.7
25Kpps @ 6*11*0.7
31Kpps @ 6*11*0.7
34Kpps @ 6*11*0.7

Speed @ Mirror size
19Kpps @5*10*0.7
23Kpps @5*10*0.7
27Kpps @5*10*0.7
32Kpps @5*10*0.7
35Kpps @5*10*0.7

Test Pattern
ILDA 30K
ILDA 30K
ILDA 30K
ILDA 30K
ILDA 30K

Contents of Shipping Package:

(2) 2804 Scanner (Galvo) with mirror
(2) Scan V2.5G servo driver (Amp)
(1) X-Y scanner mount
(1) ±15 VDC switched power supply
(2) Shield cable for scanner

SM2803 - 35Kpps Laser Scanner ...........$420.00

SM2804 Laser Scanner

The SM2804 is one of the lowest cost closed-loop scanners for display in the world. It is specially designed for low-cost laser projectors powered by a control board with embedded software. The galvo structure of SM2804 is based on our proprietary technology which lowers the cost.

The SM2804 is a smart choice if you design a laser projector with a preprogrammed control board inside. It can be tuned up to 23Kpp@+/-15°on ILDA 30K test pattern and can do “beam show” as well as “graphic show”.

Max Scan angle: ±30°optical (factory calibration @±20°)
Mirror Size: 6mm*11mm*0.7mm, (5mm*10mm*0.7mm for higher speed)
Mirror coating: High quality dielectric film,
Reflectivity: >98% @ 45°incidence (400nm-700nm)
Dimension of Galvo: 12mm (diameter for fixture) x 42mm (length without mirror)
Power requirements: ±15VDC @1A each
Input Voltage: ±5VDC differential
Dimensions of Amp: 75mm*40mm*35mm

Scan angle
±30°Opt
±20°Opt
±15°Opt
±8°Opt
±5°Opt

Operating voltage
±15 VDC
±15 VDC
±15 VDC
±15 VDC
±15 VDC

Speed @ Mirror size
16Kpps @ 6*11*0.7
20Kpps @ 6*11*0.7
23Kpps @ 6*11*0.7
28Kpps @ 6*11*0.7
32Kpps @ 6*11*0.7

Speed @ Mirror size
17Kpps @5*10*0.7
21Kpps @5*10*0.7
24Kpps @5*10*0.7
30Kpps @5*10*0.7
33Kpps @5*10*0.7

Test Pattern
ILDA 30K
ILDA 30K
ILDA 30K
ILDA 30K
ILDA 30K

Contents of Shipping Package:

(2) 2804 Scanner (Galvo) with mirror
(2) Scan V2.5G servo driver (Amp)
(1) X-Y scanner mount
(1) ±15 VDC switched power supply
(2) Shield cable for scanner

SM2804 - 33Kpps Laser Scanner ...........$405.00

SM2815 Laser Scanner

The SM2815 is one of the fastest closed-loop scanners in the world. The galvo of SM2815 uses a double length magnetic rotator compared to the SM2800, making it more powerful.

Our test results show that the SM2800 can be tuned up to 60Kpps @±12°optical scan angle on ILDA 30K test pattern with mirror size of 0.7mm x 6mm x 11mm. It can even go up to 80Kpps @±5°after optimizing the parameters of AMP (Scan V4.3A).

Max Scan angle: ±30°optical (factory calibration @±20°)
Mirror Size: 6mm*11mm*0.7mm, (5mm*10mm*0.7mm for higher speed)
Mirror coating: High quality dielectric film
Reflectivity: >98% @ 45°incidence (400nm-700nm)
Dimension of Galvo: 12.7mm (diameter for fixture) x 42mm (length without mirror)
Power requirements: ±24VDC @ 1.2A each
Input Voltage: ±5VDC differential
Dimensions of Amp: 81.6mm*62.5mm*33mm
Protection Circuitry: Input clamping and power limiter circuit built in Amp.

Scan angle
±30°Opt
±20°Opt
±15°Opt
±12°Opt
±5°Opt

Operating voltage
±24 VDC
±24 VDC
±24 VDC
±24 VDC
±24 VDC

Speed @ Mirror size
31Kpps @ 6*11*0.7
40Kpps @ 6*11*0.7
51Kpps @ 6*11*0.7
60Kpps @ 6*11*0.7
80Kpps @ 6*11*0.7

Speed @ Mirror size
33Kpps @5*10*0.7
43Kpps @5*10*0.7
53Kpps @5*10*0.7
64Kpps @5*10*0.7
82Kpps @5*10*0.7

Test Pattern
ILDA 30K
ILDA 30K
ILDA 30K
ILDA 30K
ILDA 30K

Contents of Shipping Package:

(2) 2815 Scanner (Galvo) with mirror
(2) Scan V4.3A servo driver (Amp)
(1) X-Y scanner mount
(1) ±24 VDC switched power supply
(2) Shield cable for scanner

SM2815 - 82Kpps Laser Scanner ...........$775.00

Orders: 603-673-6493 | Fax: 603-672-5406 | Inquiries: Email Contact

Please direct inquiries and technical questions/assistance through email; you should get a response within 1 business day.
But before you do this, read the item description completely. Chances are good that you'll find the answers there.

PO Box 716, Amherst, NH 03031-0716